top of page
  • kathleenbminton

Whether to Weather

Whether you want to emulate the passage of time or guard against it, the following are some helpful tips for exterior finishes.

Protection Against Weathering

You can't completely stop or reverse the weathering of exterior wood, but you can slow the process dramatically by using the right type of finish.

Two basic types of finishes are used to protect wood surfaces from weathering – those that form a film or coating on the wood and those that penetrate the wood surface and leave no distinct layer. Film-forming materials include paints and varnishes. Penetrating finishes include water repellents, preservatives, and pigmented semitransparent stains.

When selecting an exterior finish, consider the appearance, durability, cost, surface type, ease of application, and maintenance.


Of all finishes, paints provide the most protection for wood against ultraviolet degradation and simple erosion. A painted surface retards exterior moisture penetration, blocks out damaging ultraviolet rays, and seals natural resins and other oils that can otherwise be weathered out into the wood.

It's generally accepted today that a good acrylic latex exterior house paint will perform as well as or even outlast a good oil-based house paint. Latex paints are more porous and can breathe slightly – while still shedding water – which may contribute to their longevity. In addition, oil-based paints tend to become brittle while latex paints retain their flexibility.

Painting is best done on a fairly smooth and stable surface, such as low-density, vertical-grain, and edge-grain woods that resist shrinking and swelling.


What makes clear varnish finishes popular is that they accent and enhance the grain and color of the wood surface. Unfortunately, all types of varnishes – oil-based, alkyd, urethane, and acrylic – require frequent maintenance. Ultraviolet light from the sun eventually breaks down the varnish. To avoid frequent scraping and recoating, the best approach to using varnish for exterior surfaces is to provide reliable shade, such as recessed openings, roofs, and overhangs.

Penetrating Finishes

Penetrating finishes are designed to be absorbed into the wood, saturating the surface fibers and partially or completely filling the surface pores. Many finishes contain water repellents and wood preservatives. The preservatives control the growth of mildew and other fungi, and some even discourage insect infestation.

The mixture is classified as a semi-transparent penetrating stain when inorganic pigments are added to clear penetrating finishes. The pigment in the stain greatly increases the durability of the finish by absorbing much of the ultraviolet light. However, the total mix of pigment, resin, preservative, and water repellent ultimately determines the durability of any stain system.

The protective qualities of penetrating stains are best used on rough-sawn, weathered, or coarse-textured woods – the very type of surface that won't take paint well, including siding, trim, exposed decking, fences, and roof shingles.

Creating a Weathered Look

Timeworn, aged, lived in, rustic, natural, nostalgic, antique. All descriptors are conjured up by the look of weathered wood. If you prefer a rough, gray, and weathered look for your exterior, like the kind provided by Mother Nature, it can be obtained in two ways.

  • You can do nothing until the wood turns gray, then treat it regularly with a water-repellent preservative or a gray semitransparent stain to extend the life of the wood.

  • If you want to obtain a weathered look immediately, apply a gray stain; as the stain weathers, the wood will turn gray naturally. Be sure, however, to continue to protect the finish with a stain or water-repellent preservative.

*Original Article by Sherwin Williams*

14 views0 comments

Recent Posts

See All
bottom of page